Published papers

We are a university spin-out company and have an interest in new and complex applications, so we are always keen to hear from those doing more fundamental research.

Below is a sample of the papers of which we are aware that have included data generated from our systems, as well as a couple of the early papers that led to the founding of Imetrum.

If you are using one of our systems and would like to include you research paper here, please get in touch.

Wen Q, Hua X.G, Lei X, Chen Z.Q, Niu H.W Experimental study of wake-induced instability of coupled parallel hanger ropes for suspension bridges. Engineering Structures 167 (2018) 175-187

Xu Y, Brownjohn JMW, Hester D, Koo K-Y Long-span bridges: Enhanced data fusion of GPS displacement and deck accelerations. Engineering Structures 147 (2017) 639–651

Hester D, Brownjohn J, Bocian M, Xu Y Low cost bridge load test: Calculating bridge displacement from acceleration for load assessment calculations. Engineering Structures 143 (2017) 358–374

Brownjohn JMW, Xu Y and Hester D Vision-based bridge deformation monitoring. Frontiers in Built Environment April 2017, Volume 3, Article 23

Brownjohn J, Xu Y, Hester D, Bassitt, J, Morgan, M Evaluating a video gauge for deformation measurements of two UK long span bridges, The 9th International Cable Supported Bridge Operator’s Conference Halifax, Nova Scotia, June 19-22, 2016

Brownjohn J, Hester D, Xu Y Bassitt J, Koo K-Y Viability of optical tracking systems for monitoring deformations of a long span bridge, 6th European Conference on Structural Control, Sheffield 11-13 July 2016

Xu Y, Brownjohn J M W, Hester D, Koo K-Y Dynamic displacement measurement of a long-span bridge using vision-based system, 8th European Workshop On Structural Health Monitoring (EWSHM 2016), 5-8 July 2016, Spain, Bilbao

Piniotis G, Gikas V, Mpimis T, Perakis H Deck and Cable Dynamic Testing of a Single-span Bridge Using Radar Interferometry and Videometry Measurements. Journal of Applied Geodesy, February 2016.

Ye XW, Yi T-H, Dong CZ, Bai H Mulit-Point Displacement Monitoring of Bridges Using a Vision-Based ApproachWind and Structures, Vol, 20, No 2. 20th February 2015

Waterfall PW, MCormick N, Owens E Optical Imaging for Low Cost Structural Measurements Proceedings of the Institution of Civil Engineers, Civil Engineering August 2012

McCormick N & Lord J Digital image correlation for structural measurements Proceedings of the Institution of Civil Engineers, Civil Engineering 165, Issue CE4, pp 185–190, November 2012

Waterfall PW, Macdonald JHG, McCormick NJ Targetless Precision Monitoring of Road and Rail Bridges using Video Cameras 6th International Conference on Bridge Maintenance, Safety and Management, July 2012

Waterfall PW, Setchell C Real-time Dynamic Monitoring using Video Cameras. 12th KTA International Symposium on Mechanized Tunnelling Technology. November 2011

Barton EN & Zhang B Details of temperature compensation for strain measurements on NPL bridge – demonstrator for SHM, Applied Mechanics and Materials, Volume 24-25, pp 173–178, July 2010

Gattulli V, Lepidi M, Macdonald JHG & Taylor CA One-to-two global-local interaction in a cable-stayed beam observed through analytical, finite element and experimental models, International Journal of Non-linear Mechanics, Volume 40, Number 4, pp 571-588, May 2005

Gattulli V, Lepidi M, Macdonald JHG & Taylor CA One-To-Two Global-Local Quadratic Interaction in a Cable-Stayed Beam: Analytical Prediction and Experimental Validation, 5th International Symposium on Cable Dynamics, Santa Margherita Ligure, Italy, pp 165-172, September 2003

Macdonald JHG, Dagless EL, Thomas BT & Taylor CA Dynamic measurements of the Second Severn Crossing, Proceedings of the ICE: Transport, Volume 123, Number 4, pp 241-248, November 1997

Macdonald JHG & Taylor CA Dynamic testing of the Second Severn Crossing during construction, 2nd International Conference on Structural Dynamics Modelling, pp 449-460, Windermere, Cumbria, July 1996

Stephen GA, Brownjohn JMW & Taylor CA Measurements of static and dynamic displacement from visual monitoring of the Humber Bridge, Engineering Structures, Volume 15, Number 3, pp 197- 207, 1993

Desai N, Poling J, Chen C-C, Gielda L Developing an International Undergraduate Research Community in College Engineering Programs. Purdue University 2018

Zhong X, Peng X, Yan S, Shen M, Zhai Y Assessment of the feasibility of detecting concrete cracks in images acquired by unmanned aerial vehicles. Automation in Construction 89 (2018) 49-57

Su G, Chen Z, Ju JW, Jiang J Influence of temperature on the strainburst characteristics of granite under true triaxial loading conditions. Engineering Geology March 2017

Ao W K, Reynolds P Optimal Analysis, Design and tseting of an elctromagnetic damper with resonant shunt circuit for vibration control of a civil structure. 23rd International Congress on Sound and Vibration, Greece July 2016

XY Zheng, H Li, W Rong, W Li Joint earthquake and wave action on the monopile wind turbine foundation: An experimental study. Marine Structures vol 44, pp 125-141, December 2015

Rivero A E, Fournier S, Weaver P M, Cooper J E, Woods BKS Manufacturing and characterisation of a composite FishBAC morphing wind tunnel model. 29th International Conference on Adaptive Structures and Technologies September 2018, Seoul, Korea

Belloni V, Ravanelli R, Nascetti A, Di Rita M, Mattei D, Crespi M Digital image correlation from commercial to FOS software: a mature technique for full-field displacement measurements. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Volume XLII-2, 2018

Liang X, Zhang H, Zuo MJ,Qin Y Three new models for evaluation of standard involute spur gear mesh stiffness. Mechanical Systems and Signal Processing 101 (2018) 424–434

Loupos K, Damigos Y, Amditis A, Gerhard R, Rychkov D, Wirges W, Schulze M, Lenas S-A, Chatziandreoglou C, Malliou C M, Tsaoussidis V, Brady K and Frankenstein B Structural health monitoring system for bridges based on skin-like sensor. Materials Science and Engineering 236 (2017)

Dawson R, Patel A, Alako K, Parhar S, Hinde C, Reynolds C In-operando optical observations of alkaline fuel cell electrode surfaces during harsh cycling tests. International Journal of Hydrogen Energy (2017)

Eckstein E, Halbig M C, Weaver P Thermally-Driven Morphing with High Temperature Composites 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 2016

Mahadik Y & Potter KD Experimental investigation into the thermoelastic spring-in of curved sandwich panels Composites Part A: Applied Science and Manufacturing, February 2013

Scholey JJ, Wilcox PD, Wisnom MR & Friswell MI Quantitative experimental measurements of matrix cracking and delamination using acoustic emission Composites Part A: Applied Science and Manufacturing, Volume 41, Issue 5, pp 612-623, May 2010

Imperiale VA, Cosentino E, Weaver PM & Bond IP Compound joint: A novel design principle to improve strain allowables of FRP composite stringer run-outs Composites Part A: Applied Science and Manufacturing, Volume 41, Issue 4, pp 521-531, April 2010

Thill C, Etches JA, Bond IP, Potter KD & Weaver PM Corrugated composite structures for aircraft morphing skin applications 18th International Conference of Adaptive Structures and Technologies, Ottawa, Canada, October 2007

Mordant C, Dietz M, Taylor C, Degee H Shaking table tests on unreinforced load-bearing masonry frames. 9th International Conference on Structural Dynamics, Porto, Portugal June 2014

Sulzer S, Alabort E, Németh A, Roebuck B and Reed R On the Rapid Assessment of Mechanical Behavior of a Prototype Nickel-Based Superalloy using Small-Scale Testing. Metallurgical and Materials Transactions A, Volume 49A, September 2018

Hervy M Cellulose nanopaper as reinforcement for sustainable polymer composites. Imperial College London 2018

Fotouhi M, Suwarta P, Jalalvand M, Czel G and Wisnom M Acoustic emission monitoring of thin ply hybrid composites under repeated quasi-static tensile loading. University of Bristol 2018

Bullegas G, Benoliel J, Fenelli P L, Pinho S T, Pimenta S Towards quasi isotropic laminates with engineered fracture behaviour for industrial applications. Composites Science and Technology 165 (2018) 290–306

Hervya M, Bock F, Lee K-Y Thinner and better: (Ultra-)low grammage bacterial cellulose nanopaperreinforced polylactide composite laminates. Composites Science and Technology 167 (2018) 126–133

Henry J, Pimenta S Increasing damage tolerance in composites using hierarchical brick-and-mortar microstructures. Journal of the Mechanics and Physics of Solids 118 (2018) 322–340

Gu H, Pavier M, Anton Shterenlikht A Experimental study of modulus, strength and toughness of 2D triangular lattices. International Journal of Solids and Structures June 2018

Sycks D.G, Wu T, Park H S, Gall K, Tough, stable spiroacetal thiol-ene resin for 3D printing. Journal of Applied Polymer Science (2018): 10.1002/46259

Cheong L W, Rouse J.P, Hyde C.J, Kennedy A.R. The Prediction of isothermal cyclic plasticity in 7175-T7351 aluminium alloy with particular emphasis on thermal ageing effects. International Journal of Fatigue 114 (2018) 92-108

Abdullah S, Iannucci L, Greenhalgh E.S On the translaminar fracture toughness of Vectran/epoxy composite material. Composite Structures (2018)

Fotouhia M, Jalalvand M, Wisnom M.R Notch insensitive orientation-dispersed pseudo-ductile thin-ply carbon/glass hybrid laminates. Composites Part A 110 (2018) 29-44

Milad M, Green S, Ye J Mechanical properties of reinforced composite materials under uniaxial and planar tension loading regimes measured using a non-contact optical method. Composite Structures 2018

Yu HN, Longana M.L, Jalalvand M, Wisnom M.R, Potter K.D Hierarchical pseudo-ductile hybrid composites combining continuous and highly aligned discontinuous fibres. Composites: Part A 105 (2018) 40-56

Sotayo A, Green S, Turvey G Development, characterisation and Finite Element modelling of novel waste carpet composites for structural applications. Journal of Cleaner Production 183 (2018) 686-697

Tapper R.J, Longana M.L, Yu H, Hamerton I, Potter K.D Development of a closed-loop recycling process for discontinuous carbon fibre polypropylene composites. Composites Part B 146 (2018) 222-231

Blok L.G, Longana M.L, Yu H, Woods B.K.S. An investigation into 3D printing of fibre reinforced thermoplastic composites. Additive Manufacturing 22 (2018) 176-186

Wu X, Fuller J.D, Longana M.L, Wisnom M.R Reduced notch sensitivity in pseudo-ductile CFRP thin ply angle-ply laminates with central 0° plies. Composites Part A 111 (2018) 62-72

Neville R.M, Groh R.M.J, Pirrera A, Schenk M Shape Control for Experimental Continuation. ACCIS, University of Bristol (March 2018)

Zhanga W, Neville R, Zhang D, Scarpa F, Wang L, Lakes R The two-dimensional elasticity of a chiral hinge lattice metamaterial. University of Bristol (2018)

Fotouhi M, Suwarta P, Jalalvand M, Czel G, Wisnom, R. M. Acoustic Emission Monitoring of Thin Ply Hybrid Composites under Repeated Quasi-Static Tensile Loading. University of the West of England (2018)

Montes C R, Reis V L, Santiago R C, Rezende M C, Tiburcio C G, Donadon M V High strain rate behavior of fiber-reinformced thermoplastic composites under compressive loadings. 24th ABCM International Congress of Mechanical Engineering
December 2017, Brazil

Brito C.B.G, Contini RdeC M.S, Gouvêa R.F, Scaglioni de Oliveira A, Arbeloa M.A, Donadon M.V Mode I Interlaminar Fracture Toughness Analysis of Co-Bonded and Secondary Bonded Carbon Fiber Reinforced Composites Joints. Materials Research. 2017; 20(Suppl. 2): 873-882

Hervy M, Blaker J.J, Braz A L, Lee K-Y Mechanical response of multi-layer bacterial cellulose nanopaper reinforced polylactide laminated composites. Composites: Part A, December 2017

Yu HN, Longana M.L, Jalalvand M, Wisnom M.R, Potter K.D Hierarchical pseudo-ductile hybrid composites combining continuous and highly aligned discontinuous fibres. Composites: Part A 105 (2018) 40–56

Czél G, Rev T, Jalalvand M, Fotouhi M, Longana M.L, Nixon-Pearson O.J, Wisnom M.R Pseudo-ductility and reduced notch sensitivity in multi-directional all-carbon epoxy thin-ply hybrid composites. Composites: Part A 104 (2018) 151–164

Finley J, Yu H, Longana M.L, Pimenta S, Shaffer M.S.P, Potter K.D. Exploring the pseudo-ductility of aligned hybrid discontinuous composites using controlled fibre-type arrangements. Composites: Part A November 2017

Jalalvand M, Fotouhi M, Wisnom M.R Orientation-dispersed pseudo-ductile hybrid composite laminates – A new lay-up concept to avoid free-edge delamination. Composites Science and Technology October 2017

Pozegic T.R, Hamerton I Polybezimidazole carbon fibre composite – utilising a high performance thermoplastic. 21st International Conference on Composite Materials Xi’an, August 2017

Anthony D.B, Nogales O.R.B, Shaffer M.S.P, Bismarck A, Robinson P and Pimenta S Crack arrest in finger jointed theroplastic PES interleaved CFRC. 21st International Conference on Composite Materials, Xi’an, August 2017

Bacarreza O, Maidl S, Robinson P and Shaffer M.S.P Exploring the use of friction to introduce ductility in compsites. 21st International Conference on Composite Materials Xi’an, August 2017

Fotouhi M, Jalalvand M, Wisnom MR High performance quasi-isotropic thin-ply carbon/glass hybrid composites with pseudo-ductile behaviour in all fibre orientations. Composites Science and Technology 152 (2017) 101-110

Rev T, Czél G, Jalalvand M , Wisnom MR Undirectional Hybrid Composite Overload Sensors. 21st International Conference on Composite Materials, Xi’an

Alam P, Mamalis D, Robert C, Lafferty A D, Ó Brádaigh C Mechanical properties and damage analyses of fatigue loaded CFRP for tidal turbine applications. 12th European Wave and Tidal Energy Conference 2017, Cork

Sun J, Bacarreza O and Robinson P. Pseudo ductility in quasi-isotropic CFRP through ply weakening. 21st International Conference on Composite Materials, Xi’an August 2017

Wyatt H L, Clarke A, Evans S L, and Mihai L A Optical strain measurement techniques for soft cellular structures. Cardiff University 2017

Ai Q, Weaver P.M and Azarpeyvand M Design and mechanical testing of a variable stiffness morphing trailing edge flap. Journal of Intelligent Material Systems and Structures 2017

Fotouhi M, Suwarta P, Jalalvand M, Czel G & Wisnom M.R Acoustic emission monitoring of thin ply hybrid composites under repeated quasi-static tensile loading. Youth Symposium on Experimental Solid Mechanics.

Czel G, Rev T, Jalalvand M, Fotouhi M & Wisnom M.R Demonstration of pseudo-ductility in quasi-isotropic laminates comprising thin-ply UD carbon/epoxy hybrid sub-laminates. European Conference on Composite Materials 2017

Ferreira R.T.L, Amatte I.G, Dutra T.A, Bürger D Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers. Composites Part B 124 (2017) 88-100

Sun W, Sebastian W, Keller T, Ross J Mixed mode fracture properties of GFRP-adhesive interfaces based on video gauge and acoustic emission measurements from specimens with adherend fibres normal to the interfaces. Composites Part B 123 (2017) 179-192

Song W, Barber K, Lee K-YHeat-induced bubble expansion as a route to increase the porosity of foam-templated bio-based macroporous polymers. Polymer 118 (2017) 97-106

Sycks D.G, Safranski D.L, Reddy N.B, Sun E, Gall K Tough semicrystalline thiol−ene photopolymers incorporating spiroacetal alkenes. Macromolecules May 2017

Yasaee M, Mohamed G,Pellegrino A,Petrinic N, Hallett SR Strain rate dependence of mode II delamination resistance in through thickness reinforced laminated composites. International Journal of Impact Engineering 107(2017)1-11

Yasaee M, Mohamed G, Pellegrino A, Petrinic N, Hallett SR Strain rate dependence of mode II delamination resistance in through thickness reinforced laminated composites. International Journal of Impact Engineering 107(2017)1-11

Song Y, Li Y, Song W, Yee K, Lee K-Y, Tagarielli VL Measurements of the mechanical response of unidirectional 3D-printed PLA. Materials and Design, Volume 123 5 June 2017, pages 154-164

Coules HE, Horne GCM, Kabra S, Colegrove P, Smith DJ Three-dimensional mapping of the residual stress field in a locally-rolled aluminium alloy specimen.Journal of Manufacturing Processes Volume 26, April 2017, Pages 240–251

Hervy M, Santmarti A, Lahtinen P, Tammelin T, Lee K-Y Sample geometry dependency on the measured tensile properties of cellulose nanopapers. Materials & Design Volume 121, 5 May 2017, Pages 421–429

Longana M L, Yu HaNa, Jalavand M, Wisnom M R, Potter K D Aligned discontinuous intermingled reclaimed/virgin carbon fibre composites for high performance and pseudo-ductile behaviour in interlaminated carbon-glass hybrids. Composites Science and Technology, Volume 143, 3 May 2017, Pages 13–21

Fleury RNM, Nowell D, Sui T, Ying S, Korsunsky AM, Tai YH, Silva F Characterisation of handling and service surface damage on Nickel alloys caused by low velocity impacts of blunt hard objects. Mechanics of Materials Volume 107, April 2017, Pages 45–55

Mohagheghian I, Wang Y, Jiang L, Zhang X, Guo X, Yan Y, Kinloch AJ, Dear JP Quasi-static bending and low velocity impact performance of monolithic and laminated glass windows employing chemically strengthened glass. European Journal of Mechanics - A/Solids Volume 63, May–June 2017, Pages 165–186

Ozdemir NG, Scarpa F, Craciun M, Remillat CDL, Lira C,Jagessur Y, Da Rocha-Schmidt L. Morphing nacelle inlet lip with pneumatic actuators and a flexible nano composite sandwich panel. Smart Materials and Structures, 24(12),University of Bristol Open Access

Liu C, Yuan Y, Zhang M Uncertainty analysis of displacement measurement with Imetrum Video Gauge. ISA Transactions 2016

Desai N, Georgakis C, Fischer G A comparison between the minimum resolutions of two digital image correlation-based tools in making strain measurements. IAJC-ISAM International Conference 2016

Freimanis A and Paeglitis A Peridynamic mesh sensitivity analysis for quasi-static simulations. Modern Building Materials, Structures and Techniques, 2016

Longana M L, Yu HN, Jalalvand M and Potter K D The high performance discontinuous fibre technology for consistent quality control of reclaimed carbon fibres. 17th European Conference on Composite Materials, Munich June 2016

Czél G, Jalalvand M, Wisnom M R Hybrid specimens eliminating stress concentrations in tensile and compressive testing of unidirectional composites. Composites: Part A, 2016

Czéla G, Jalalvand M, Wisnom M R, Czigány T Design and characterisation of high performance, pseudo-ductile all-carbon/epoxy unidirectional hybrid composites. Composites Part B: Engineering November 2016

Kimura T, Nakamoto T, Mizuno M, Araki H Effect of silicon content on densification, mechanical and thermal properties of Al-xSi binary alloys fabricated using selective laser melting. Materials Science and Engineering: Volume 682, 13 January 2017, Pages 593–602

Yasaeea M, Bigg L, Mohamed G, Hallett S R Influence of Z-pin embedded length on the interlaminar traction response of multi-directional composite laminates. Materials and Design, November 2016

Liu T, Turner P Dynamic compressive response of wrapped carbon fibre composite corrugated cores. Composite Structures October 2016

Hartley J W, Tse G, Kratz J, Ward C and Partridge I Column interaction in tufted sandwich structures under edgewise loading 17th European Conference on Composite Materials, Munich June 2016

Fotouhi M, Suwarta P, Jalalvand M, Czel G, Wisnom M R Accoustic emission based method to characterise the damage modes in UD thin carbon/glass hybrid laminates 17th European Conference on Composite Materials
Munich, Germany, June 2016

Hilal A A, Thom N H, Dawson A R Failure Mechanism of Foamed Concrete Made with/without Additives and Lightweight Aggregate. Journal of Advanced Concrete Technology Vol. 14, 511-520 September 2016

Hartley J W, Tse G, Kratz J, Ward C and Partridge I Column Interaction in Tufted Sandwich Structures Under Edgewise Loading. 17th European Conference on Composite Materials, Munich 26-30 June 2016

Heath C J C, Neville R M, Scarpa F, Bond I P and Potter K D Morphing hybrid honeycomb (MOHYCOMB) with in situ Poisson's ratio modulation. Smart Materials and Structures, Volume 25, Number 8 July 2016

Boba K, Bianchi M, McCombe G, Gatt R, Griffin A C, Richardson R M, Scarpa F, Hamerton I, and Grima J N Blocked shape memory effect in negative Poisson’s ratio polymer metamaterials. Applied Materials and Interfaces July 2016

Yu H, Longana M L, Grail, G, Pimenta S, Robinson P, Wisnom M R, Potter K D Aligned short fibre composites with nonlinear behaviour. 20th International Conference on Composite Materials, Copenhagen July 2015

Wisnom MR, Czélb G, Swolfsc Y, Jalalvanda M, Gorbatikhc L, Verpoest I Hybrid effects in thin ply carbon/glass unidirectional laminates: accurate experimental determination and prediction. Composites Part A: Applied Science and Manufacturing, April 2016

Fotouhia M, Suwarta P, Jalalvand M, Czel G, Wisnom M R Detection of fibre fracture and ply fragmentation in thin-ply UD carbon/glass hybrid laminates using acoustic emission. Composites Part A: Applied Science and Manufacturing, Volume 86, July 2016, Pages 66–76

Czél G, Jalalvand M, Wisnom M R Design and characterisation of advanced pseudo-ductile unidirectional thin-ply carbon/epoxy– glass/epoxy hybrid composites. Composite Structures, 2016

Fuller J D, Jalalvand M, Wisnom M R Combining fibre rotation and fragmentation to achieve pseudo-ductile CFRP laminates. Composite Structures, January 2016

Luterbacher R, Trask RS and Bond IP Static and fatigue tensile properties of cross-ply laminates containing vascules for self-healing applications. Smart Materials and Structures, Vol 25 No 1 November 2015

Huang J, Gong X, Zhang Q, Scarpa F, Liu Y, Jinsong L In-plane mechanics of a novel zero Poisson's ratio honeycomb core. Composites Part B Engineering (Impact Factor: 2.98) November 2015

Ozdemir NG, Scarpa F, Craciun M, Remillat C, Lira C, Jagessur Y, Da Rocha-Schmidt L Morphing nacelle inlet lip with pneumatic actuators and a flexible nano composite sandwich panel. Smart Materials and Structures, September 2015

Luterbacher R, Trask RS, Bond IP Self-healing of skin-stiffener debond specimens under fatigue conditions. 20th International Conference on Composite Materials Copenhagen, 19-24th July 2015

Hazzard MK, Curtis PT, Iannucci L, Hallett S,Trask R. An inverstiagetion of in plane performance of ultra high molecular weight polyethylene composites. 20th International Conference on Composite Materials Copenhagen, 19-24th July 2015

Dong X, Raffles M, Cobos-Guzman S, Axinte D, Kell J. A Novel Continuum Robot Using Twin-Pivot Compliant Joints: Design, Modeling and Validation. Journal of Mechanisms and Robotics August 2015.

Yu H, Longana M, Jalalvand M, Wisnom M, Potter K. Pseudo-Ductility in Intermingled Carbon/Glass Hybrid Composites with Highly Aligned Discontinuous Fibres. Composites Part A - Applied Science and Manufacturing, 4th March 2015

J.D. Fuller, M.R. Wisnom. Pseudo-ductility and damage suppression in thin ply CFRP angle-ply laminates.Composites Part A: Applied Science and Manufacturing 10 November 2014

Gergely Czél, Soraia Pimenta, Michael R. Wisnom, Paul Robinson. Demonstration of pseudo-ductility in unidirectional discontinuous carbon fibre/epoxy prepreg composites. Composites in Science 1st November 2014.

Wang J, Potter KD & Etches J Experimental investigation and characterisation techniques of compressive fatigue failure of composites with fibre waviness at ply drops, Composite Structures, Volume 100, pp 398-403, June 2013

Lemanski SL, Wang J, Sutcliffe MPF, Potter KD & Wisnom MR Modelling failure of composite specimens with defects under compression loading, Composites: Part A, Volume 48, pp 26–36, May 2013

Bloom LD, Wang J & Potter KD Damage progression and defect sensitivity: An experimental study of representative wrinkles in tension Composites: Part B, Volume 45, pp 449–458, February 2013

Mulvihill D.M, Brunskill H, Kartal M.E, Dwyer-Joyce R.S and Nowell D. A comparison of contact stiffness measurements obtained by the digital image correlation and ultrasound techniques. Experimental Mechanics, 53(7), pp. 1245-1263, January 2013

Clarke MI & Broughton JG Selection And Validation Process For Adhesives Used In Advanced Composite Truss Structures, Seico 11 Paris - 32nd International Conference, March 2011

Dulieu-Barton JM, Boyenval Langlois C, Thomsen OT, Zhang S and Fruehmann RK Derivation of temperature dependent mechanical properties of polymer foam core materials using optical extensometry, 14th International Conference on Experimental Mechanics, Volume 6, June 2010

Mccombe GP, Etches JA, Bond IP and Mellor PH Magnetostrictive Actuation of Fiber-Reinforced Polymer Composites Journal of Intelligent Material Systems and Structures, Volume 20, Number 10, pp 1249-1257, July 2009

Towse A, Potter K, Wisnom MR & Adams RD Specimen size effects in the tensile failure strain of an epoxy adhesive, Journal of Materials Science, Volume 33, Number 17, pp 4307-4314, September 1998

Lukaszewicz DH-JA & Potter K Through-thickness compression response of uncured prepreg during manufacture by automated layup. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Volume 226, Number 2 pp 193-202, February 2012

Waterfall PW, Read-Jennings MCL, Scenini F, McCormick NJ Impact of surface finish and target size for testing and monitoring using cameras. The 9th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies. June 2012

Scenini F, Azough F, Read-Jennings MCL, Waterfall PW & Shoesmith JP Use of Digital Image Correlation (DIC) for detection of defects and monitoring of structural integrity in the nuclear industry 9th International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurized Components, Seattle, USA, May 2012

Hutt T & Cawley P Feasibility of digital image correlation for detection of cracks at fastener holes NDT&E International, Volume 42, Issue 2, pp 141-149, March 2009

Garstka T, Ersoy N, Potter KD, Wisnom MR In situ measurements of through-the-thickness strains during processing of AS4/8552 composite. Composites: Part A 38, pp 2517–2526, 2007

Wróbel-Kwiatkowska M, Kropiwnicki M, Zebrowski J, Beopoulos A, Dymińska L, Hanuza J, Rymowicz W Effect of mcl-PHA synthesis in flax on plant mechanical properties and cell wall composition. Transgenic Research November 2018

Acikgozd S, DeJong M.J, Kechavarzia C, Soga KDynamic response of a damaged masonry rail viaduct: Measurement and interpretation. Engineering Structures 168 (2018) 544-558

Wang H, Markine V and Liu X Experimental analysis of railway track settlement in transition zones. Journal of Rail and Rapid Transit December 2017

Wang H and Markine V.L Analysis and improvement of the dynamic track behaviour in transition zone. Bearing Capacity of Roads, Railways and Airfields – Loizos et al. (Eds) 2017

Xiangming Liu, Valri L Markine, Ivan Shevtsov Dynamic experimental tools for condition monitoring of railway turnout crossing. The Second International Conference on Railway Technology: Research, Development and Maintenance. Corsica, France, 8-11th April 2014

Su G, Chen Z, Ju J W, Zhao B, Yan S and Yan Z Experimental study of the dynamically induced rockburst of a rock wall with double free faces. International Journal of Damage Mechanics 2018

Poling J, Desai N, Fischer G, Georgakis C Effect of out-of-plane specimen movement on strain measurement using digital-image-correlation-based video measurement in 2D and 3D. Journal of Civil Structural Health Monitoring (2018) 8:331-352

Ba P, Zhang Y, Wu J, Zhang Z The Failure Criterion of Single-Layer Spherical Lattice Shell Based on Kinetic Energy. Mathematical Problems in Engineering, 2015.

Pangfeng BA, Yigang ZHANG, Jinzhi WU, Zhihao Zhang The Failure Criterion of Single-layer Spherical Lattice Shell Base on Kinetic Energy, Hindawi Publishing Corporation, July 2015.

Mordant C, Degee, H Shake table tests on unreinforced load-bearing masonry structural elements. Second European Conference on Earthquake Engineering and Seismology. Istanbul, Aug 25th -29th 2014.

Marsico MR, Tzanov V, Wagg DJ, Neild SA & Krauskopf B Amplitudes of vibration for a parametrically excited inclined cable close to two-to-one internal resonance. August 2010

Macdonald JHG, Dietz MS & Neild SA Dynamic excitation of cables by deck and/or tower motion, Proceedings of the Institution of Civil Engineers, Bridge Engineering 163, Issue BE2, pp 101–111, June 2010

Macdonald JHG, Dietz MS, Neild SA, Gonzalez-Buelga A, Crewe AJ & Wagg DJ Generalised modal stability of inclined cables subjected to support excitations, Journal of Sound and Vibration, 329, 21, pp 4515 - 4533, May 2010

Marsico MR, Wagg DJ & Neild SA Stability for Bridge Cable and Cable-Deck Interaction. 3rd International Conference on Advances in Experimental Structural Engineering, San Fransisco, June 2009

Gonzalez-Buelga A, Neild SA, Wagg DJ & Macdonald JHG Modal stability of inclined cables subjected to vertical support excitation, Journal of Sound and Vibration 318(3), pp 565–579, December 2008

Gonzalez-Buelga A, Neild SA, Wagg DJ, Dietz M, Macdonald JHG & Crewe AJ Cable-bridge-deck interaction modelled via real-time dynamic substructuring, 7th European Conference on Structural Dynamics (EURODYN 2008), Southampton, Paper E173, July 2008

Massow CLS, Gonzalez-Buelga A, Macdonald JHG, Neild SA, Wagg DJ & Champneys AR Theoretical and experimental identification of parametric excitation of inclined cables, 7th International Symposium on Cable Dynamics, Vienna, pp 97-104, December 2007

Vidal V, Massow CLS, Macdonald JHG, Crewe AJ & Champneys AR Experimental validation of a non-linear dynamic cable model with axial end excitation, Symposium on the Mechanics of Slender Structures, Northampton, Paper 19, September 2006

Lorenzo R. & Macdonald JHG Experimental Validation of a Simplified Cable-stayed Bridge Model Exhibiting Autoparametric Resonance, 5th International Symposium on Cable Dynamics, Santa Margherita Ligure, Italy, pp 157-164, September 2003